90 Degree Heavy Duty Heads

CTL Centreline offers a large range of heavy duty, 90 degree heads to accept either 40 or 50 taper toolholders. capable or milling, drilling and tapping and with through tool coolant available as an option, this range is very popular on larger gantry machines, bed mills and horizontal borers.
 
Designed to give additional capabilities to set ups where rotating large components is either not possible, very difficult or time consuming, machining times can be greatly reduced.
 
Heads are normally Cowl mounted directly to the front of the spindle with the possibility for multiple location points for quick and easy head indexing and with optional table mounted storage cradles where toolchange is not possible.
Download range

90 Degree Heavy Duty Heads

  • RAM400-40

    A heavy duty, Steel bodied unit with milling capability but with the flexibility of interchangeable tooling adaptors to facilitate the location of drills, taps, end mills, shell mills etc.

     

    The Tooling is held in position with a manual drawbar and accurately located on an ISO 40 Taper (CAT/DIN/BT/ISO tooling can be used).

     

    The RAM 400-40-ST is designed for direct mounting to machine spindle nose via a dedicated cowl assembly for optimum rigidity. Radial timing is achieved via a Location Pin and the head has full 360° manual rotation adjustability.

    Download PDF
  • RAM400-40-TC

    A heavy duty, Aluminium bodied unit with milling capability but with the flexibility of interchangeable tooling adaptors to facilitate the location of drills, taps, end mills, shell mills etc.

     

    The Tooling is held in position with a manual drawbar and accurately located on an ISO 40 Taper (CAT/DIN/BT/ISO tooling can be used).

     

    The RAM 400-40-AL is designed to be toolchanged on larger capacity machining centres. Radial timing is achieved via a spring loaded tapered location pin and the head has full 360° manual rotation adjustability.

    Download PDF
  • RAM400-40-300

    A heavy duty, Extended, Steel bodied unit with milling capability but with the flexibility of interchangeable tooling adaptors to facilitate the location of drills, taps, end mills, shell mills etc.

     

    The Tooling is held in position with a manual drawbar and accurately located on an ISO 40 Taper (CAT/DIN/BT/ISO tooling can be used).

     

    The RAM 400-40-ST-300 is designed for direct mounting to machine spindle nose via a dedicated cowl assembly for optimum rigidity. Gauge length is 300mm and Radial timing is achieved via a Location Pin and the head has full 360° manual rotation adjustability.

     

    Download PDF
  • RAM400-40-375

    A heavy duty, extended, Steel bodied unit with milling capability but with the flexibility of interchangeable tooling adaptors to facilitate the location of drills, taps, end mills, shell mills etc.
     
    The Tooling is held in position with a manual drawbar and accurately located on an ISO 40 Taper (CAT/DIN/BT/ISO tooling can be used).
     
    The RAM 400-40-ST-375 is designed for direct mounting to machine spindle nose via a dedicated cowl assembly for optimum rigidity. Gauge length is 375mm and Radial timing is achieved via a Location Pin and the head has full 360° manual rotation adjustability.

    Download PDF
  • RAM400-40-450

    A heavy duty, extended, Steel bodied unit with milling capability but with the flexibility of interchangeable tooling adaptors to facilitate the location of drills, taps, end mills, shell mills etc.
     
    The Tooling is held in position with a manual drawbar and accurately located on an ISO 40 Taper (CAT/DIN/BT/ISO tooling can be used).
     
    The RAM 400-40-ST-450 is designed for direct mounting to machine spindle nose via a dedicated cowl assembly for optimum rigidity. Gauge length is 450mm and Radial timing is achieved via a Location Pin and the head has full 360° manual rotation adjustability.

    Download PDF
  • RAM500-50-CWL

    A heavy duty, high power unit with milling capability but with the flexibility of interchangeable tooling adaptors to facilitate the location of drills, taps, end mills, shell mills etc.

     

    The Tooling is held in position with a manual drawbar and accurately located on an ISO 50 Taper (CAT/DIN/BT/ISO tooling can be used).

     

    The RAM 500-50 is designed for direct mounting to machine spindle nose via a Cowl assembly dedicated to machine. Radial timing is achieved via a Location Pin and has full 360° rotation adjustability.

    Download PDF
  • RAM500-50-300

    A heavy duty, extended, Steel bodied unit with milling capability but with the flexibility of interchangeable tooling adaptors to facilitate the location of drills, taps, end mills, shell mills etc.
     
    The Tooling is held in position with a manual drawbar and accurately located on an ISO 50 Taper (CAT/DIN/BT/ISO tooling can be used).
     
    The RAM 500-50-ST-300 is designed for direct mounting to machine spindle nose via a dedicated cowl assembly for optimum rigidity. Gauge length is 300mm and Radial timing is achieved via a Location Pin and the head has full 360° manual rotation adjustability.

    Download PDF
  • RAM500-50-375

    A heavy duty, extended, Steel bodied unit with milling capability but with the flexibility of interchangeable tooling adaptors to facilitate the location of drills, taps, end mills, shell mills etc.
     
    The Tooling is held in position with a manual drawbar and accurately located on an ISO 50 Taper (CAT/DIN/BT/ISO tooling can be used).
     
    The RAM 500-50-ST-375 is designed for direct mounting to machine spindle nose via a dedicated cowl assembly for optimum rigidity. Gauge length is 375mm and Radial timing is achieved via a Location Pin and the head has full 360° manual rotation adjustability.

    Download PDF
  • RAM500-50-450

    A heavy duty, extended, Steel bodied unit with milling capability but with the flexibility of interchangeable tooling adaptors to facilitate the location of drills, taps, end mills, shell mills etc.
     
    The Tooling is held in position with a manual drawbar and accurately located on an ISO 50 Taper (CAT/DIN/BT/ISO tooling can be used).
     
    The RAM 500-50-ST-450 is designed for direct mounting to machine spindle nose via a dedicated cowl assembly for optimum rigidity. Gauge length is 450mm and Radial timing is achieved via a Location Pin and the head has full 360° manual rotation adjustability.
     

    Download PDF