Coolant Nozzles

QPM coolant nozzles and related accessories for use on CNC Lathes, Machining Centers, Grinders, Screw Machines, Manual Mills and assorted production equipment.
The coolant nozzle plays a critical role in the proper supply of coolant. It must accurately direct an adequate flow with sufficiant velocity directly at the Tool - Workpiece interface and must resist vibration, swarf and inertial forces that could knock it out of alignment. All QPM nozzles are easy to aim, yet are rigid and compact to ensure reliable performance. 
Download range

Coolant Nozzles

  • Turret Jet

    The QPM Turret Jet is a universal coolant nozzle for CNC Machines, rated to 150 PSI (10 BAR), with new metric tapped balls to allow use with Extension Tubes and Spray Tips. Fits NPT or BSPT threads - just choose the orifice size and extension to suit your application!

    Download PDF
  • Cap Jet

    The QPM Cap Jet is a universal cap-type coolant nozzle, rated to 150 PSI (10 BAR).

    New metric tapped balls allow use with Extension Tubes and SprayTips. Fits NPT and BSPT pipe nipples.

    Download PDF
  • Jet Bolt

    The QPM Jet Bolt is a universal cap-type coolant nozzle, rated to 150PSI (10BAR). The new metric tapped balls allow use with Extension Tubes and Spray Tips. Fits NPT and BSPT pipe nipples.

    Download PDF
  • Plug Jet

    QPM PlugJet is a screw-in, flush mounting coolant nozzle. It screws into either a BSPT or NPT tapped hole and offers 35 degrees of adjustment either side of centreline. Rated at 150psi, it is ideal fir applications where nozzle projection must be minimised.
     

    Download PDF
  • Mill Jet

    The QPM Mill Jet is a coolant nozzle for vertical and horizontal machining centres. Adjusts from full shut off to fine fan spray to direct stream. Aimable from zero to 90¢ª with 360¢ª sweep.

    Download PDF
  • Lock Jet

    The QPM Lock Jet is a locakable high pressure coolant nozzle, rated to 1500psi (100 bar). Fits NPT and BSPT threads. Aimable and lockable, ideal for applications where the nozzle could get bumped or knocked out of position. Easy Interchangeable balls.

    Download PDF
  • Pressure Max

    QPM PressureMax is  a high pressure coolant nozzle for cnc machines. Rated at 1500psi (100 bar) is available with either Brass or Stainless Steel body and available with extended spray tips to shoot coolant further. PressureMax bodies are supplied in either straight or 45 degree configurations to give greated angle adjustment.

    Download PDF
  • Compression Fittings

     
    Recommended for use with JetTubes, available in either straight or 90 degree elbow configuration and with a variety of thread and tube sizes.

    Download PDF
  • Dual Fit

    Pipe fittings to adapt to coolant nozzles. Work primarily with TurretJets and CapJets. Available in either Brass or Acetal and fit both BSPT and NPT.

    Download PDF
  • SprayTips

    Screw-in Brass Spray Tips for use in tapped ball nozzles. Available with a variety of orifice sizes and ideal for concentrating the coolant stream at the cutting edge.
    Angled outlet SprayTips enable coolant to be aimed outside a nozzle's normal range of motion. 

    Download PDF
  • Extension Tubes

    Extend your threaded coolant nozzle with an Extension Tube. Can be used with a variety of QPM nozzles. Installed in seconds to make aiming a breeze. Choose from either rigid Brass to direct coolant directly at the cutting edge, or Bendable copper tubes to direct coolant around obstructions.

    Download PDF
  • JetTube

    JetTube is a copper tube with an integral, aimable outlet orifice. Just cut the Copper tube to your desired length, bend as required, then aim the spherical outlet orifice to hit your target. Rated up to 500psi and used inconjunction with QPM Compression Fittings.

    Download PDF
  • SweatJet

    Solderable fittings that adapt your favourite hoses and nozzles to Copper tubing. Easy to solder, increases nozzle reliability by allowing the use of short rigid hoses. Rated to 500psi, allows QPM SwivelMax, QPM SprayTips and QPM PressureMax to be used on Copper tubing.

    Download PDF
  • SwivelMax

    SwivelMax Modular coolant nozzle system for CNC and manual machines. Extremely versatile system with an incredible range of motion in each joint. Compact design is ideal for tight spaces. Available with either FixedFlow or VariFlow nozzles and interchangeable orifices.Rated at 100psi and available with either threaded or spherical bases. New adapters allow the use of 'Loc-Line' and 'Snap-Loc' systems.

    Download PDF
  • AL 360 Modular Hose System

    AL360 is a Modular Hose System offering the ability to build an extremely flexible coolant hose to specific requirements offering an unparalleled range of motion. Manufactured from Acetal offering a resistance to chamical agents found in coolant and Non electro - conductive. Each set up will be vibration free and fits NPT and BSPT thread connections. A range of outlet nozzles is available for a variety of coolant supplies operating at pressures up to 90psi.

    Download PDF
  • BrassBalls

    Brass Balls are Screw-Lock Brass Coolant Nozzles for CNC Lathes. Conventional Brass Ball Nozzles available in a variety of ofifice sizes and configurations. With either plain or threaded bores and with either straight or angled extensions. Tapped balls can be plugged with a setscrew or extended by using with Extension Tubes.Maximum operation temperature 150º C and Maximum pressure of 500psi (33 bar)

     

    Download PDF
  • BlackEye

    Black Eye is a Screw-Lock Coolant Nozzles for CNC Lathes. An easy-to-aim replacement for screw-lock spherical coolant nozzles. Rated at 150psi (10 bar) and with sizes available to fit almost every machine or toolholder. Just install and tighten lock screw once, then aim the Stainless Steel ball with the tip of an Allen key. Choose a tapped ball if you need to quickly plug the orifice of to use with Extension Tubes. 

    Download PDF
  • BugEye

    BugEyes are Screw-Lock Extended Coolant Nozzles for CNC Lathes. An extended ball socket provides a greater range of aimability the the BlackEye range, while still being relatively compact. Ideal for tool positions where the tool tip is difficult to reach with standard screw-lock balls. Rated at 150psi (10 bar) and with sizes available to fit almost every machine or toolholder. Just choose the orifice diameter to suit your application.

    Download PDF
  • LolliPop

    Lollipops are Screw-Lock ball coolant nozzles with integral copper tube extensions for CNC Lathes. Just cut the Copper tube to your desired length and bend as required. Space efficiaent design is ideal for tight spaces and ideal for live tooling. Rated at 500psi (33 bar) with sizes available to fit almost every machine or toolholder. choose 3/16" tubing for ease of bending or 1/4" tubing for maximum flow.
     

    Download PDF
  • TwinPop

    TwinPops are Screw-Lock ball coolant nozzles with 2 integral copper tube extensions for CNC Lathes. Double tubes allow coolant to be directed above and below the tool using only one coolant outlet. Just cut the Copper tubes to your desired length and bend as required. Rated at 500psi (33 bar) with sizes available to fit almost every machine or toolholder.

    Download PDF
  • OddBall

    OddBall is a Screw-Lock ball that adapts your favourite Hoses and Nozzles to fit your CNC lathe. Allows Loc-Line, Snap-Loc and 1/8" NPT/BSPT fittings to be used on CNC Lathes that employ Screw-Lock balls. sizes available to fit almost every machine or toolholder. Choose Acetal material for low pressures up to 150psi (10 bar) or Brass material for higher pressure applications up to 500psi (33 bar)

    Download PDF
  • JiffyJet

    JiffyJet is a Press-in Coolant Nozzle. Just drill and ream a hole, press in a JiffyJet and you've got an easily aimable coolant nozzle. Ideal for special tooling, VDI holders, CNC lathe tooling etc. Rated at 150psi (10 bar) +/-35º adjustment either side of centreline. 

    Download PDF
  • ScrewBall

     
    Screwball is a Press-in Coolant Nozzle with tapped hole. Just drill and ream a hole, press in a ScrewBall and you've got an easily aimable coolant nozzle. Threaded hole can be fitted with an Extension Tube, SprayTip, or plugged with a set screw. +/-35º adjustment either side of centreline. Ideal for quickchange toolholders with multiple ports. Rated at 150psi (10 bar) Max. Available in a variety of colours.

    Download PDF
  • PrestoPort

     
    PrestoPort is a High Pressure, Press-fit Port Adapter. Converts low pressure ScrewBall type ports to High Pressure fixed, threaded ports. 

    Download PDF
  • Check Valves

     
    Check Valves. ideal for Horizontal or Vertical Machining Centres. Stops drain-down of coolant lines between tool changes. Eliminates delay of coolant flow, preventing dry cutting. 

    Download PDF
  • Manifold

     
    Manifolds are used for adding multiple nozzles on Horizontal or vertical machining centres.

    Download PDF
  • Ball Valves

    Compact design is ideal for a wide variety of machining applications. Use with water-based coolants, oil or air (also vacuum applications). Corrosion resistant chrome-plated brass. Teflon seals. Rated ad 250psi (16 bar) max. 

    Download PDF
  • ChuckPuck

     
    ChuckPuck is a Flexible Foam Disc for plugging Lathe Chuck through holes. Keeps swarf and coolant from accumulating in the spindle bore. Reduces vibration. Reduces wear on chuck and spindle. Improves roundness and concentricity. Fire retarded for safety.

    Download PDF
  • BorePlug

     
    BorePlugs are plugs for Boring Bar Holders. Prevents chip accumulation in empty boring bar holders. prevents loss of clamping screws. Prolongs toolholder life. 

    Download PDF